We have the indigenous capacity to design, fabricate and manufacture quality morgue/postmortem Cold Storage Room, Refrigerated Chill cabinets, Body Storage Trays, adjustable racking and Stub Roller System and other postmortem process equipment.
We provide an end-to-end solution for Cold Room Business Plan; taking your project from design through to manufacturing, supply and installation in your facility.
DeKoolar Morgue Solutions come in a variety of model designs, sizes and specifications according to each client’s project requirements for Cold Room Business Plan.
The room panel will be constructed from foamed-in-place urethane-insulated modular panels that provide high-density rigid insulation. These modular panels are typically 4″ thick (R34) but can also be supplied in 5″ (R42) and 6″(R56) thicknesses. The urethane-to-metal bond with vinyl gaskets to flanges at an angle 90 will provide an airtight seal as well as tremendous strength. The insulated panels will be UL-Fire Test Approved and will have a low frame spread rating of 25 or less. We use Italian panels and Swing Door and 304 Grade (18 gauge) stainless steel in morgue fabrication projects.
Usually, we mount the Cooling System on the roof of the most constructed morgue. Our Condensing Unit is made up of the condenser (copper), liquid receiver, vibration spring/absorber, lock up valve, solenoid valve, and Copeland or Bitzer compressor (Made in Germany), R404 Refrigerant, R22 gases while our evaporator consists of the evaporation coil, heater and evaporation valve with equalizer.
Condensing Unit components:
Compressor (Bitzer or Copeland)
Condenser coil (Copper)
Double fan for heat extraction
Low & high-pressure switch
Copper Evaporator coil
Our cold room control panel is equipped with the following:
- Phase failure/monitor device
- Overload protector
- Digital Thermometer
- Defrost timer
- Delay timer
- Selector switch
- Pilot Light
- Coldroom Power Capacity: 380-415 volts ( 3phase)
- Body Colour: White/Off-white
- Door Type: Swing
- Flooring: Fully insulated floor structure reinforced with WPB plywood/Tiles/Checkered plate
|S/N||SIZE ( FT) L x B x H||GENERATOR CAPACITY
|1.||8 * 8 * 8 ft Cold room||10KVA||3 HP||5 Tonnes|
|2.||10 * 8 * 8 ft Cold room||10KVA||3 HP||6 Tonnes|
|3.||16 * 8 * 8 ft Cold room||12.5 KVA||4 HP||10 Tonnes|
|4.||20 * 8 * 8 ft Cold room||12.5 KVA||5 HP||12 Tonnes|
|5.||20 * 10 * 8 ft Cold room||12.5 KVA||5 HP||15 Tonnes|
|6.||25 * 10 * 8 ft Cold room||18 KVA||8 HP||20 Tonnes|
|7.||28 * 12 * 8 ft Cold room||20KVA||10 HP||25 Tonnes|
|8.||20 * 20 * 8 ft Cold room||30KVA||12.5 HP||30 Tonnes|
|9.||32 * 16 * 8 ft Cold room||40KVA||15 HP||40 tonnes|
|10.||26 * 20 * 10 ft Cold room||40KVA||15 HP||50 Tonnes|
|11.||35 * 20 * 10 ft Cold room||55KVA||20 HP||70 Tonnes|
|12.||54 * 20 * 10 ft Cold room||80KVA||30 HP||100 Tonnes|
|13.||64 * 20 * 12 ft Cold room||100KVA||45 HP||150 Tonnes|
|14.||42 * 40 * 12 ft Cold room||150KVA||60 HP||200 Tonnes|
|15.||80 * 40 * 16 ft Cold room||N/S||Depends on Design||500 Tonnes|